|
|
 |
 |
|
Cat.
6 (Solid)
The general difference between category 5e and category 6 is in
the transmission performance, and extension of the available
bandwidth from 100MHz for category 5e to 250MHz for category 6,
this includes better insertion loss, near end crosstalk (NEXT),
return loss, and equal level far end crosstalk (ELFEXT). These
improvements provide a higher signal-to-noise ratio, allowing
higher reliability for current applications and higher data rates
for future applications.
|
|
Application
Gigabit Ethernet
ATM 622 or higher
Broadband Video (77 Channels 550 MHz)
Industry Standard
UL/CSA Listed CM, CMR
UL, ETL Verified to ANSI/TIA/ EIA
568B Category 6
ISO/IEC-11801
Product Description
Conductor : 24 AWG Bare Solid Copper
Insulation : HDPE, FRPE
Jacket : FRPVC
Product Electrical
Characteristics . . . . . .
Impedance
Mutual Capacitance, Max.nf/1000ft
DC Resistance, Max.Ohms/1000ft
DC Resistance Unbalance
of a pair
Capacitance Unbalance
(Pair to Ground)
Propagation Delay Skew
Normal Velocity of Propagation |
:
:
:
:
:
:
: |
100+/-
15 ohm
17.1
28.6
5% max.
330pf/ 100m max.
45ns/ 100m
66% |
Cat.
6 (Patch)
The general difference between category 5e and category 6 is in
the transmission performance, and extension of the available
bandwidth from 100MHz for category 5e to 250MHz for category 6,
this includes better insertion loss, near end crosstalk (NEXT),
return loss, and equal level far end crosstalk (ELFEXT). These
improvements provide a higher signal-to-noise ratio, allowing
higher reliability for current applications and higher data rates
for future applications.
|
|
Application
1000 Base T (IEEE 802.3 ab)
ATM 622 or higher
Broadband Video (77 Channels 550 Mhz)
Industry Standard
UL/CSA Listed CM, CMR
UL, ETL and 3P Verified to ANSI /TIA/EIA
568.B-2-1 Category 6
ISO/IEC-11801
NEMA WC 66
PREN 50288-6-2
Product Description
Conductor : 24 AWG Bare Stranded Copper
Insulation : HDPE, FRPE
Jacket : FRPVC
Product Electrical
Characteristics . . . . . .
Impedance
Mutual Capacitance, Max.nf/1000ft
DC Resistance, Max.Ohms/1000ft
DC Resistance Unbalance
of a pair
Capacitance Unbalance
(Pair to Ground)
Propagation Delay Skew
Normal Velocity of Propagation
Attenuation to Crosstalk
Ratio |
:
:
:
:
:
:
:
: |
100+/-
15 ohm
17.1
28.6
5% max.
330pf/ 100m max.
45ns/ 100m
62% at 100 MHz
At 100 MHz, typical 22.5 dB
At 200 MHz, typical 13.4 dB
At 250 MHz, typical 7.0 dB |
|
|
|
|
|
 |
|
|
Cables